Electrons travel across the bulb to a collector plate, which creates the output current. Now, it might seem like a silly way to do that. But if we add another wire (a grid) between the filament and the collector, we can control this output current. A negative voltage on the control will push the electrons back away from the collector to reduce the output current. Putting a positive voltage on the grid increases the flow of output current.
So this is again a current switch, and just like the relay, it’s controlled by a different wire. But there are two big differences: First, there’s no mechanical contact, which means the output current can change much faster. Second, the output current is not just on or off; it can vary with the strength of the control voltage.
This is what made the first audio amplifiers possible. If you had a weak signal from a distant radio station, it would not…




